80 Men’s Haircut Pictures, and Why a Photo Alone Isn’t Enough

The skin fade delivers maximum impact, tapering down to the skin for a striking contrast with the top length; here it’s paired with a high starting point, though a skin fade can begin higher or lower on the head depending on preference.

Closely associated with Black barbershop culture, this style creates a sharp, architectural frame for your face that draws attention upward.

On an oval face, a high skin fade shows more of the head’s outline and puts the visual weight on top, so the face shape itself stays on display.

On a square face, the close sides leave the jaw corners fully visible, which echoes their angularity if you like that effect; keep more length at the sides if you would rather soften it.

On a diamond face, taking the temples down to skin makes the cheekbones the widest visible point, so choose it if you want to show them off; more length kept at the temples does the opposite.

Styling approach. Slick the top back with pomade for a sophisticated look, or use texturising paste for a more casual, tousled finish.

The mid-fade starts between the temples and ears, creating definition while maintaining a softer look than the high fade.

On a round face, close sides with a little height on top can make the outline look slightly longer and more defined.

On a heart face, the mid fade removes bulk at the temples, which can make the upper face look a little narrower; a lower, softer fade keeps more fullness there if you prefer.

On a rectangular face, the mid fade keeps the sides tidy without adding height on top, so it does not add visible length unless you style the top upward.

Styling approach. Have a textured crop on top for a contemporary look, or style it a bit longer and swept-back for a more dramatic statement.

Choose the fade’s starting height and its shortest finish separately, because a mid fade can still finish at skin or leave a short guard length. Ask your barber for both, based on the look and upkeep you want rather than on your face shape.

This edgy combination pairs the structure of a fade with the drama of a man bun, creating a style that mixes a neat, structured finish with an artistic touch.

On an oval face, the bun pulls hair away from the face and adds height at the crown, which exposes the hairline and gives a taller outline.

On a diamond face, pulling the hair back shows the cheekbones fully; leave a few strands loose at the temples if you would rather soften that width.

On a heart face, a high bun adds height at the crown and pulls hair away from the forehead, while a lower bun or loose strands only frame the lower face if they actually sit near the jaw and chin, so place the bun and any loose strands for the effect you want.

Styling approach. Apply sea salt spray to damp hair before gathering it into a loose bun for texture.

For a sleeker approach, use pomade to smooth the sides, creating contrast with the bun.

It is one way to wear growing length on top while keeping the sides short.

More subtle than other fades, the taper gradually reduces hair length down to the natural hairline.

On a square face, the gradual taper keeps the sides neat without a hard line and leaves the jaw corners visible, so their angularity reads clearly.

On a rectangular face, a taper with a flatter top adds little height, so it keeps the face from looking longer.

On an oval face, the taper is a simple, low-key option that leaves the outline as it is, with the top styled however you prefer.

Styling approach. The taper fade’s versatility allows for numerous styling options, from a side part with pomade for a classic look to a textured top with matte clay for contemporary appeal.

The close-cropped fade combines short textured hair on top with a side fade, creating definition and structure.

The blunt fringe can be styled forward or textured for different effects. On a round face, the straight fringe and close sides add straight lines to a curved outline.

On a heart face, a fringe worn forward covers some of the forehead, which can make the upper face look less broad.

On a diamond face, a forward fringe adds fullness across the forehead while the close sides leave the cheekbones as the widest visible point.

Styling approach. Use a small amount of matte clay to create subtle texture on top, working the product through with your fingertips for a natural finish.

This low-maintenance style offers a sharp, contemporary look with minimal effort.

The comb-over fade combines precision fading on the sides with a longer, directional top that can be combed to one side.

This versatile style offers clean lines with classic appeal, making it suitable for both professional and social settings.

Men with oval faces can wear the comb-over fade for a neat, structured look; the face shape does not limit how the top is styled.

On a rectangular face, combing the top sideways rather than upward keeps height low, so the face does not look longer; if you also want some width, ask for a softer fade that leaves more length above the ears.

Triangle-faced men who want the forehead to look broader next to the jaw can keep more volume on top and at the upper sides; if you prefer to echo the strong jaw instead, keep the top flatter.

Styling approach. For maximum volume, apply dry shampoo at the roots before blow-drying in your desired direction.

Finish with a matte pomade, concentrating on the ends to create texture and hold without excessive shine.

The classic fade offers a subtler approach with longer hair on top that gradually tapers down the sides and back.

This versatile style works with various hair types and complements a range of face shapes.

On a square face, the classic fade leaves the jaw corners visible while the longer top keeps a neat, refined shape.

On an oval face, the classic fade is a straightforward option that keeps the outline much as it is.

On a heart face, tapered rather than full sides stop extra width building at the temples; sweep some of the top forward if you would like the forehead to look narrower still.

Styling approach. Create a sophisticated finish by applying a small amount of medium-hold pomade and combing into a slight part.

The razor fade takes the traditional fade to the next level, using a straight razor to create an exceptionally close cut on the sides and back. This technique delivers ultra-precise lines and maximum contrast with the top length.

On a diamond face, razor-close sides make the cheekbones the widest visible point and create a sharp outline.

On an oval face, the razor fade adds a crisp, high-contrast edge without changing the outline much, so the choice rests on whether you like that contrast and the upkeep it needs.

On a square face, the very close sides and sharp lines echo the angular jaw rather than soften it.

Styling approach. The razor fade is an excellent base for various top styles, from slicked-back looks to textured crops and pompadours.

The curly hair fade keeps natural curls on top and fades the sides close.

The curls are cut and styled to their natural pattern rather than straightened, so the height on top depends on how tightly your hair curls.

On a round face, curls kept taller on top with close sides add height, which can make the face look longer if you want that; how much height you get depends on your curl pattern and shrinkage.

On a heart face, curls bring softer movement around the forehead, and letting some fall forward reduces how much forehead shows.

On a rectangular face, curls that sit out to the sides add width while curls stacked high add length, so ask for a softer fade and keep the volume lower and wider if you want the face to look less long.

Styling approach. Apply curl-enhancing cream to damp hair and either air-dry or use a diffuser attachment when blow-drying.

Avoid disturbing the curls too much once dry; use your fingers to position them for the desired shape and height.

The fade buzz needs almost no daily styling, though the fade needs regular barber visits to stay sharp; it combines the ultra-short buzz on top with faded sides.

The minimal difference in length creates a subtle yet defined look that emphasises facial features.

On an oval face, the fade buzz shows the head and face outline plainly, a low-upkeep choice if you are comfortable with very short hair.

On a diamond face, the very short top and faded sides leave the cheekbones as the widest visible point.

On a square face, the short length leaves the jaw corners in full view, so the cut echoes the angular outline rather than softening it.

Styling approach. This style requires minimal product, so apply a small amount of matte paste to add a slight texture to the top.

Similar to a Caesar cut, the French crop features short sides with slightly longer hair on top.

Depending on length, the front can be worn forward over the forehead or swept aside.

On a square face, the short sides keep the jaw corners visible while the textured top adds a neat frame that suits creative and corporate settings alike.

On an oval face, the French crop adds texture on top and a fringe that can sit forward or aside, depending on how much forehead you want to show.

On a round face, a blunt fringe and squared top add straight lines to a curved outline.

Styling approach. Apply minimal matte paste for a natural texture or pomade for a sleeker finish.

Unlike the one-length buzz cut at number 28, this version leaves the top slightly longer than the sides, which adds a little height while keeping the cut short and plain.

On an oval face, this short cut keeps the attention on the face, and the slightly longer top adds a little height.

On a diamond face, the close sides keep the cheekbones the widest visible point, and the slightly longer top adds a little height above a narrower forehead.

On a square face, the minimal length leaves the angular jaw fully visible, so the cut echoes it rather than softening it.

Styling approach. Virtually product-free, apply a small amount of matte paste if desired for slight texture.

The slick back remains one of the most sophisticated yet sensual men’s hairstyles, projecting maturity and confidence. This versatile style works across formal and casual settings with minimal adjustment.

On a heart face, slicking the hair back shows the whole forehead, so it suits you if you are happy for the forehead to be on display; a softer, looser version shows less of it.

On a rectangular face, a slick back kept flat on top adds little height, and leaving the sides slightly fuller adds some width at the temples, if you want the face to look less long.

On an oval face, the slick back gives an old-Hollywood finish and shows the hairline and forehead clearly.

Styling approach. Apply pomade to damp hair, brushing backward from the forehead to create a smooth, controlled shape. For texture, rough the dried style slightly with fingertips.

The side part is an old-money haircut depicting professional refinement. It creates structure through precise parting. This businessman’s cut offers a controlled aesthetic that conveys attention to detail and sophistication.

On a round face, a defined parting and a slightly lifted top add straight lines and a little height.

On a square face, a side parting adds a classic finish without changing the angular jaw; sweep more hair across the forehead if you want a softer look.

On an oval face, a side parting is a simple, polished option that keeps the outline as it is.

Styling approach. Create a defined part with a comb, applying pomade for hold and shine. For a modern interpretation, add texture to the top section while maintaining the clean part.

Shoulder-length hair can be worn loose, tucked behind the ears or tied back, which gives it more ways to wear than any of the short cuts here.

On a diamond face, longer hair falling around the cheekbones covers some of their width and adds fullness nearer the forehead and jaw, if you want to soften the cheekbone line.

On a heart face, layers that fall around the jaw can add visual width there (a cut cannot change the jaw itself), which makes the forehead look less dominant.

On a triangle face, longer hair can fall over the jaw corners and soften them, while volume at the crown and temples adds width higher up.

Styling approach. Apply texture spray to damp hair before air-drying or blow-drying for volume. Style with minimal product so the lengths keep their natural movement.

The hi-top fade was a hip-hop style of the 1980s and early 1990s, and Ebony credits Black barbers with the reworked fade it grew from in the mid-1980s. It combines a tall, flat-sided top with closely faded sides.

On a rectangular face, the hi-top’s height sits straight up on top while the faded sides stay close, so it makes a long face look longer rather than wider; choose it if you want to echo that length, or ask for a lower, flatter top if you do not.

On a round face, the tall top adds height and the close sides keep width down, which can make the face look longer.

On a heart face, the tall top adds more height above an already broader forehead, so it emphasises the upper face.

Styling approach. Apply mousse to damp hair before blow-drying upward for maximum height. Finish with a firm-hold spray to maintain the dramatic silhouette throughout the day.

Britannica traces the pompadour to Madame de Pompadour, mistress of King Louis XV of France; in the men’s version, the front hair is brushed up and back. The height is greatest at the front and drops away toward the crown.

On a square face, the pompadour’s height adds length above the angular jaw.

On an oval face, the added height makes the face look a little longer, so set the height to the amount of extra length you are happy with.

On a triangle face, the pompadour adds height and some fullness at the front, drawing the eye upward and away from a broader jaw.

Styling approach. Apply volumising mousse to damp hair, blow-drying backward while lifting at the roots. Finish with pomade for definition and hold, concentrating on creating height at the hairline.

The quiff features a prominent section of hair brushed upward and backward from the forehead.

The sides are cut short and faded up from the neckline, while the front is left longest so it has the length to lift.

On a round face, the lifted front adds height, which can make the face look longer.

On a heart face, the quiff adds height above the broader forehead; keep it lower and push some hair forward if you would rather draw less attention there.

On a diamond face, the quiff adds height and some fullness above a narrower forehead, while the cheekbones stay the widest visible point.

Styling approach. Apply volumising product to damp hair before blow-drying upward. Create the signature forelock by working pomade through the front section, lifting it, and sculpting it to the desired height.

The side fringe is one of the most adaptable fringe styles.

Whether your hair is long, short, bobbed, or cropped, there’s a side fringe variation to enhance your features and add dimension.

On a rectangular face, a side fringe covers some of the forehead, which shortens the visible face length if you want it to look less long.

On an oval face, a side fringe adds an angled line across the forehead.

On a diamond face, a side fringe adds fullness across a narrower forehead while the cheekbones remain visible.

Styling approach. Apply texturising spray to damp hair and blow-dry the fringe in your desired direction. Finish with light-hold paste worked through the ends for definition without stiffness.

While nearly every face shape can suit some version of fringe, the straight fringe creates a powerful horizontal line that dramatically frames the face.

The key to this style lies in determining exactly where the edge should fall, whether accentuating your brow line or skimming just below it.

On a heart face, a straight fringe covers much of the broader forehead, which makes the upper face look less dominant.

On a square face, a straight fringe adds a horizontal line at the brow that repeats the jaw’s straight lines; choose a softer, textured fringe if you would rather soften them.

On an oval face, any fringe length is an option, and a straight line at the brow draws attention to the eyes.

Styling approach. Blow-dry using a paddle brush for smoothness, then apply minimal product to maintain the clean line without weighing down the fringe.

The angular fringe haircut maintains shorter sides while leaving the top relatively long, with the distinguishing feature being a dramatic fringe that creates interesting lines across the forehead.

This architectural approach to fringe styling adds dimension and structure to softer face shapes while highlighting the distinctive features of more angular ones.

On a round face, the angled fringe and shorter sides add diagonal lines to a curved outline.

On a diamond face, an angular fringe adds fullness across the narrower forehead while leaving the cheekbones visible.

On a triangle face, the longer top and fringe add volume across the forehead, which makes the upper face look fuller next to a broader jaw.

Styling approach. Apply volumising mousse to damp hair, then blow-dry toward your desired angle. Finish with a matte styling paste to define the angular shape without adding shine.

Textured fringe haircuts incorporate layering and dimension instead of blunt cuts, creating movement and depth that traditional straight-edge fringes cannot achieve.

This style needs more length at the front than a blunt fringe, because the layers need room to move.

On a square face, textured layers at the front add movement that can soften the overall look while the jaw stays as it is.

On an oval face, a textured fringe adds movement across the forehead, and how far forward it falls is up to you.

On a rectangular face, a textured fringe covers some of the forehead and its sideways movement adds a little width, both of which make the face look less long.

Styling approach. Apply sea salt spray to damp hair, then either air-dry or blow-dry with fingers instead of a brush to enhance natural texture. Finish with matte clay worked through the ends for separation.

The short fringe, also known as baby bangs, cropped bangs or mini fringe, creates a bold statement by sitting higher than the brow bone, dramatically different from longer curtain styles.

This daring approach to fringe styling creates a focal point that draws attention to the eyes while creating a rebellious aesthetic that stands apart from conventional men’s haircuts.

On a heart face, a short fringe covers only the top of the forehead, so more forehead stays visible than with a longer fringe; choose the length for how much you want to show.

On a diamond face, a short fringe puts the focus on the eyes and cheekbones.

On a round face, the short fringe adds a straight line high on the forehead, which brings some definition to a curved outline.

Styling approach. Apply minimal product to maintain the natural texture, as short fringes look best when not overloaded with styling aids. A light misting of texture spray can add definition without weight.

While hair length varies across cultures, long bangs that cover your hairline or forehead create a dramatic frame that transforms your overall appearance.

This versatile fringe style can be swept to the side, worn straight down, or tousled for different effects that complement various face shapes and personal styles.

On an oval face, a long fringe swept to one side adds asymmetry.

On a triangle face, a long fringe adds weight across the forehead, which makes the upper face look fuller next to a broader jaw.

On a rectangular face, a long fringe covers the forehead and shortens the visible face length, and sweeping it sideways adds a little width, if you want the face to look less long.

Styling approach. Apply texturising spray to damp hair, then blow-dry with a round brush for volume or your fingers for a more casual finish. Use light-hold cream to define the ends without restricting movement.

Curly bangs represent a hairstyle in which natural texture becomes the centrepiece, whether created from natural curl patterns or with styling tools.

This distinctive approach to fringe styling works across curl types from 2c to 4c, and the curls are left to form their own shape rather than being straightened.

On a square face, curls falling over the forehead add rounded movement next to an angular jaw.

On a heart face, curls worn forward cover some of the broader forehead, which makes the upper face look less dominant.

On a diamond face, curls across the forehead add fullness above the cheekbones, which softens the cheekbone line.

Styling approach. Apply curl-enhancing cream to damp hair, then diffuse or air-dry to preserve the natural curl pattern. Once dry, avoid touching the curls to prevent frizz and maintain definition.

The French Crop fringe combines the classic structure of a traditional crop with a distinctive fringe that can be worn at various lengths, depending on the desired effect.

This versatile style works beautifully with skin fades and traditional tapered sides, creating a contemporary look with classical foundations.

On a round face, the blunt fringe and close sides add straight lines to a curved outline.

On an oval face, the French crop fringe adds a neat, defined line; wear the fringe longer or shorter depending on how much forehead you want to show.

On a triangle face, keeping more texture on top and across the fringe adds fullness at the forehead next to a broader jaw.

Styling approach. Apply matte pomade or clay to towel-dried hair, working the product from roots to ends for control without stiffness. The style can be worn with minimal volume for a cleaner look or with texture for a more casual finish.

The faux hawk fringe combines the attitude of a mohawk with the wearability of a conventional cut, creating a distinctive wave through the top with a strong fringe.

Unlike a traditional mohawk, this modified approach allows for greater versatility in side styling while maintaining the edgy central ridge that gives the cut its character.

On a diamond face, the central ridge adds height above a narrower forehead while the cheekbones remain the widest visible point.

On a rectangular face, the faux hawk builds height through the centre of the head rather than width at the sides, so it makes the face look longer; choose it if you are happy to emphasise length, or keep the ridge low and the sides less closely cut if you are not.

On a heart face, the central ridge adds height above the broader forehead and keeps width away from the temples; keep the ridge low if you do not want extra emphasis on the upper face.

Styling approach. Apply strong-hold mousse to damp hair, then blow-dry upward toward the centre to create the distinctive ridge. Finish with texturising paste worked through the fringe and centre section for definition and hold.

The buzz cut is one clipper length over the whole head, so the guard number is the whole haircut. On Wahl’s guards, a #1 leaves 1/8 inch (3 mm) and a #4 leaves 1/2 inch (13 mm).

Lower numbers show more scalp, and higher numbers leave a soft, even layer of hair.

On an oval face, the buzz cut keeps hair at one short length, so the face outline is shown plainly.

On a square face, the buzz cut leaves the angular jaw in full view, so it echoes that outline rather than softening it.

Men with diamond faces who choose a buzz cut will find the cheekbones become the widest visible point, since very short hair adds no width at the temples.

Styling approach. This style is virtually product-free, though a light moisturiser can be applied to the scalp to prevent dryness. It requires regular maintenance to preserve its precise length.

A crew cut features hair that graduates in length from front to back, with the longest portion forming a short pomp at the front hairline and the shortest at the crown.

This classic military-inspired style creates a horizontal profile when viewed from the side, offering structure and definition without excessive length.

On a round face, the short pomp at the front adds a little height, which can make the face look slightly longer.

On a heart face, the short sides keep width down at the temples, while the front pomp adds a little height above the forehead.

On a rectangular face, a crew cut with a low front adds little height, so it does not make the face look longer.

Styling approach. Apply a small amount of matte pomade or wax to slightly damp hair, working it forward to create the subtle height at the front while maintaining the clean silhouette.

The regulation cut represents one of the longer military styles, offering a balance of precision and versatility that makes it appropriate for various professional contexts.

It keeps the top trimmed short enough to comb neatly, with tapered sides whose length can be adjusted to personal preference.

On a square face, the regulation cut gives a tidy, conservative finish and leaves the jaw as it is.

On an oval face, the regulation cut is a polished, adaptable option that keeps the outline much as it is.

On a triangle face, keeping a little more length on top and at the upper sides adds fullness above a broader jaw, if you want the forehead to look wider.

Styling approach. Apply a small amount of medium-hold pomade to damp hair, combing into place for a cleaner finish or using fingers for a slightly more relaxed interpretation.

Very popular in the 1950s, the flat top is a distinctive military-inspired style that creates a striking horizontal plane across the top of the head.

This architectural haircut can be modified for different hair textures, with the “hi-top” variation particularly suited to the unique properties of coarse, curly hair.

On a heart face, the flat top adds a broad, squared shape above the forehead, which emphasises the upper face.

On a diamond face, the flat top’s squared crown adds width and height above a narrower forehead, which makes the cheekbones look less dominant.

On a round face, the flat top’s straight lines and height add definition and some length to a curved outline.

Styling approach. Apply strong-hold mousse to damp hair, then blow-dry upward using a brush to create the distinctive flat plane. Finish with firm-hold hairspray to maintain the architectural shape throughout the day.

The induction cut is the shortest uniform cut here short of a shave, one very short clipper length over the whole head with no longer hair on top.

It takes its name from the cut given at military induction, and the only upkeep is clipping it again as it grows.

On an oval face, the induction cut shows the face and head outline plainly, with almost no upkeep beyond regular clipping.

On a square face, the uniform short length leaves the angular jaw fully visible, so it echoes that outline.

On a rectangular face, the induction cut adds no height on top, so it does not make the face look longer.

Styling approach. Product-free, though scalp moisturiser can prevent dryness. This style requires regular maintenance to preserve its precise length and clean appearance.

Not strictly a military cut but sharing its disciplined aesthetic, the Ivy League style defines facial features with its clean, structured approach to short hair styling.

This refined cut leaves enough length on top to part or comb to the side, creating a sophisticated look that bridges military precision with collegiate polish.

On a diamond face, the short graduated sides keep the cheekbones visible while the parted top adds some fullness above a narrower forehead.

On a heart face, the close sides keep width down at the temples, and combing the top sideways rather than upward keeps height modest.

On a triangle face, leaving a little more volume on top adds fullness higher up next to a broader jaw.

Styling approach. Apply a small amount of water-based pomade to damp hair, combing into a neat side part for a traditional finish or working through with fingers for a slightly more relaxed interpretation.

The military buzz haircut represents the ultimate in simplicity and functionality, keeping hair at a uniform length across the entire head without transition or graduation.

Compared with the buzz cut at number 28, the military buzz is defined by its edges, with the front hairline and neckline squared off, so the cut looks sharper at the same length.

On an oval face, the military buzz keeps everything at one short length, so the outline is shown plainly.

On a round face, a crisp, squared hairline at the front adds a straight line to a curved outline.

On a square face, the uniform short length leaves the angular jaw in full view, so it echoes that outline.

Styling approach. This style is product-free, though a light moisturiser can benefit the scalp. It needs regular clipping rather than daily styling.

The high and tight represents a military variation of the crew cut, featuring extremely short sides shaved to the skin with slightly longer hair on top that blends or fades in.

This highly structured style creates dramatic contrast between the top and sides, offering a striking silhouette that emphasises the upper portion of the head.

On a diamond face, skin-short sides make the cheekbones the widest visible point, which emphasises them.

On a rectangular face, the high and tight takes the sides close to the skin, so it adds no width there, and the slightly longer top adds a little height; if you want the face to look less long, ask for a lower fade and a flatter top instead.

On a triangle face, the high and tight removes width at the temples, which makes the jaw look comparatively broader, so choose it if you want to echo that outline rather than offset it.

Styling approach. Apply minimal matte product to the top section if desired, though many wear this style without any styling aids for a natural, low-maintenance finish.

This skater haircut is perfect for those who don’t want to stand out from the crowd but still wish to have a touch of rebellious edge to their style.

The distinguishing feature is a short-textured fringe that typically sits just above the eyebrows, creating movement without the maintenance of longer versions.

On a square face, the short textured fringe adds loose movement above an angular jaw.

On an oval face, the short skater cut adds a relaxed, textured finish that works across casual settings.

On a heart face, a fringe sitting just above the eyebrows covers much of the forehead, which makes the upper face look less dominant.

Styling approach. Apply texturising spray to damp hair, then either air-dry or blow-dry with fingers to create natural movement. Finish with minimal matte paste worked through the ends for definition without excessive hold.

An ideal haircut for thick and straight hair, this longer skater style is often found in both skating and surfing communities where the loose, low-product shape is easy to wear.

The signature feature is hair that cascades down to the neck or shoulders, creating a flowing silhouette that embodies the free-spirited ethos of skate culture.

On a diamond face, long hair falling around the cheekbones covers some of their width, which softens that line.

On a rectangular face, long hair with layers that sit out at the sides adds width around the lower face, while long hair that falls flat and straight can make the face look longer; ask for side fullness if you want it to look less long.

On a triangle face, long hair falling over the jaw corners softens them, while volume at the crown adds fullness higher up.

Styling approach. Apply sea salt spray to damp hair for natural texture, allowing it to air-dry whenever possible. For a more finished look, use minimal oil or lightweight cream on the ends to prevent frizz while maintaining movement.

This is the long skater cut grown out on curly hair, with the curls left at full length.

The combination of length and texture creates a dramatic silhouette that can be worn with a centre part, side part, or pushed back, depending on activity and personal style.

On a round face, curls with some height at the crown can make the face look a little longer, but long curls that sit wide at the cheeks add width, so place the volume for the effect you want.

On an oval face, long curls add texture and movement; how wide or tall they sit depends on your curl pattern.

On a heart face, curls that sit fuller around the jaw can add visual width there (a cut cannot change the jaw itself), which makes the forehead look less dominant.

Styling approach. Apply curl-enhancing cream to wet hair, scrunching gently to encourage natural texture. Allow to air-dry whenever possible, using a diffuser attachment if blow-drying is necessary. Once dry, avoid disturbing curls to maintain definition.

This dramatic interpretation of skater style combines short or shaved sides with significantly longer hair on top, creating a bold contrast that requires minimal styling effort.

Similar to a disconnected undercut, this variation features side-swept length on top that maintains the movement and flow essential to authentic skater aesthetics.

On a square face, the short sides keep the angular jaw visible while the long top adds side-swept movement.

On a diamond face, short sides make the cheekbones the widest visible point, and the swept top adds fullness above a narrower forehead.

On an oval face, the strong contrast between short sides and a long top creates a fashion-forward outline.

Styling approach. Apply volumising mousse to damp hair, then blow-dry using fingers to create natural movement. Finish with minimal texturising paste on the ends for definition without restricting the characteristic flow of this style.

The 80s skater haircut features a messy undercut designed to channel youthful energy, combining the structure of shorter sides with the freedom of textured length on top.

This nostalgic style works particularly well with straight, fine hair where it creates natural volume and movement without requiring excessive product or manipulation.

On a round face, the contrast between shorter sides and a textured top adds some definition and height.

On a triangle face, textured volume on top adds fullness higher up next to a broader jaw.

On a rectangular face, letting the textured top move sideways rather than up keeps height low and adds a little width, if you want the face to look less long.

Styling approach. Apply sea salt spray to damp hair, then tousle with fingers while blow-drying to create natural texture. Finish with minimal matte paste worked through for separation without heaviness.

The 90s skater cut is a layered, medium-length style associated with 1990s skate culture.

This medium-length cut features gradual layering that creates movement and dimension, typically worn with a side part that allows for versatile styling.

On a heart face, side-parted layers falling across the forehead cover some of its width, if you want the upper face to look less dominant.

On an oval face, the layered 90s skater cut adds texture and movement.

On a diamond face, layers falling near the cheekbones soften that line, while the side parting adds fullness above a narrower forehead.

Styling approach. Apply lightweight mousse to damp hair, then blow-dry using fingers to create natural movement. For authentic 90s flair, push the front section to one side with minimal product to maintain flexibility.

Locs, or dreadlocks, are formed by letting hair mat into ropes or by twisting, palm-rolling or interlocking it, and can range from extra long to very short.

They carry deep cultural and religious meaning for many wearers, including in Rastafari and across the African diaspora, and they are also seen in skate culture.

On a square face, how dreadlocks frame the jaw depends on their length and how they are worn. Locks tied back leave the jaw visible, while locks falling around the face soften its corners.

On a rectangular face, locks that fall at the sides add width, while locks gathered high on the head add height and length, so choose the arrangement for the effect you want.

On an oval face, the effect depends on lock length, thickness and how the locks are styled, so treat face shape as one consideration alongside upkeep and preference.

Styling approach. Regular maintenance is essential for healthy dreadlocks. Apply specific dreadlock products to keep locks clean and well-formed, using oil to moisturise the scalp between washes.

Surfer’s hair falls into the broader category of ‘tousled hairstyles,’ characterised by a deliberately messy, casual aesthetic that appears effortlessly stylish.

This distinctive look derives its name from the stereotype of hardcore surfers whose hair has been naturally processed by sun exposure, salt water, and minimal intervention.

On a triangle face, tousled volume on top and at the temples adds fullness higher up next to a broader jaw.

On a heart face, tousled layers that fall around the jaw can add visual width there (a cut cannot change the jaw itself), which makes the forehead look less dominant.

On a round face, tousled layers with some height on top can make the face look longer, while layers that sit wide at the cheeks add width, so ask for the volume where you want it.

Styling approach. Apply sea salt spray to damp hair, then either air-dry or roughly blow-dry using fingers for natural texture. Avoid over-styling; surfer hair looks best with minimal intervention.

The Mullet-Mohawk hybrid draws on the punk mohawk and the 1980s mullet.

This dramatic style combines the volume and height of a mohawk with the longer back section of a mullet, creating a statement look that embodies rebellious energy.

On a diamond face, the central height and short sides make the cheekbones the widest visible point and create a dramatic, tall outline.

On an oval face, the mullet-mohawk adds height on top and length at the back.

On a square face, the tall central strip adds height above the angular jaw, creating strong contrast.

Styling approach. Apply strong-hold mousse to damp hair, then blow-dry upward at the crown to create height. Use pomade to define the central section, making a distinction between the mohawk top and mullet back.

The spiky fade offers a fresher, more contemporary approach to classic spiky styling, combining textured height with clean, faded sides.

This dynamic style creates motion through forward and upward spikes, while the mid fade draws attention upward to the textured top section.

On an oval face, upward spikes add height and make the face look a little longer, so set the spike height for the amount of length you want.

On a square face, spiky height on top adds vertical lines above the angular jaw.

On a diamond face, spikes add height and some fullness above a narrower forehead, while faded sides keep the cheekbones the widest visible point.

Styling approach. Apply strong-hold mousse to damp hair, then blow-dry upward using fingers or a vent brush to create height. Finish with firm-hold texturising product, working through the top section to create defined spikes with natural variation.

A sharper version of the classic spiky haircut, the spiky taper combines longer top length with gradually shortened sides, creating architectural contrast and precision.

This structured approach to spiky styling creates a refined silhouette that bridges casual and professional contexts more effectively than fully spiked styles.

On a round face, vertical spikes with tapered sides add height, which can make the face look longer.

On a heart face, the tapered sides keep width down at the temples; keep the spikes low if you do not want extra emphasis on the upper face.

On a rectangular face, tapered sides add little width, so the spike height is what matters. Keep the spikes short and low if you want the face to look less long, or let them stand taller if you are happy to add length.

Styling approach. Apply quality wax to dry hair, working through the longer top section with upward movements to create definition. The style looks particularly striking on darker hair when paired with matte products that enhance texture without adding shine.

When creating spiked looks for longer hair, texture becomes the defining feature that determines the style’s success and overall impact.

This approach adapts to different hair densities. Thick hair allows for messier styling with pomade, while thinner hair benefits from volumising products and strategic blow-drying.

On a triangle face, longer spikes with volume at the crown add fullness higher up next to a broader jaw.

On a diamond face, longer, looser spikes add fullness at the forehead and soften the line across the cheekbones.

On an oval face, longer spikes add texture and some height, so adjust their height for how much extra length you want.

Styling approach. For thicker hair, apply pomade to damp strands and work upward with fingers to create natural-looking spikes. For finer hair, use volumising shampoo followed by blow-drying for height, then apply texturising spray for definition.

For those who appreciate the dramatic silhouette of a mohawk but prefer something more versatile, the spiky faux hawk offers an ideal middle ground.

This adaptable style creates the illusion of a central ridge without committing to the extreme sides of a traditional mohawk, allowing for professional flexibility.

On a square face, the central ridge adds height above the angular jaw.

On a heart face, the faux hawk keeps width away from the temples and puts height in the centre; keep the ridge low if you do not want extra emphasis on the upper face.

On a round face, height at the centre with shorter sides can make the face look longer.

Styling approach. Comb down the sides of damp hair and secure with hairspray or gel. Apply texturising wax to the top section, working upward to create the distinctive ridge. For maximum contrast, keep the sides smooth while the centre remains textured.

The spiky pompadour starts as a classic, smooth pompadour, then separates the front into textured spikes.

The key to successful execution lies in starting with sufficient length, which allows for a traditional pompadour structure combined with deliberately separated pieces.

On an oval face, the spiky pompadour adds height and texture and makes the face look a little longer, so set the height to suit you.

On a diamond face, the textured volume adds fullness above a narrower forehead and softens the cheekbone line a little.

On a rectangular face, a pompadour mainly adds height, which makes the face look longer rather than wider; if you want it to look less long, keep the front low and let the textured top spread sideways, or choose a different cut.

Styling approach. Create a traditional pompadour using pomade and a comb for the base structure. Before finishing, carefully separate the selected sections by twisting them between your fingers to create deliberate spikes. Secure with light hairspray for lasting definition.

This distinctive spiky variation maintains consistent length throughout, creating a unified silhouette that emphasises texture over dramatic contrast or architectural lines.

Cut well, one length all over gives visible texture along the sides, which frames the face with a rougher, less groomed finish.

On a triangle face, even length with texture through the sides adds some fullness at the temples next to a broader jaw.

On a heart face, textured length that reaches the lower face adds a little width there, which makes the forehead look less dominant.

On a square face, single-length texture around the sides softens the outline slightly while the jaw corners remain visible.

Styling approach. Apply volumising mousse to damp hair, then blow-dry using fingers to create natural movement. Finish with texturising paste worked throughout for consistent definition and separation.

Natural curl patterns don’t exclude you from spiky styling; in fact, they can create unique texture that straight-haired men cannot achieve without significant product.

This specialised approach works with rather than against natural waves, using strategic product application to enhance and define existing patterns.

On a round face, wavy spikes styled upward add height, which can make the face look longer.

On a diamond face, wavy texture adds fullness above a narrower forehead and softens the cheekbone line.

On an oval face, wavy spikes add texture and some height; how much depends on your wave pattern and the product you use.

Styling approach. Apply texturising powder at the roots for lift, then use wax on fingertips to separate and define only the top section of curls. As curly hair can be heavier, finish with strong-hold hairspray to maintain height and definition throughout the day.

Windswept spiky hair combines the textured definition of traditional spiky styles with directional styling that creates the impression of natural movement.

This effortless-looking yet deliberately styled approach directs spikes to one side rather than straight up or backward, creating dynamic movement across the head.

On a square face, sideways movement adds softer, directional lines above an angular jaw.

On a rectangular face, directing the spikes sideways rather than upward keeps height low and adds a little width, if you want the face to look less long.

On a heart face, sweeping the spikes to one side covers some of the forehead, which makes the upper face look less dominant.

Styling approach. Apply texturising spray to damp hair, then blow-dry in your desired direction using your fingers to create natural separation. Finish with flexible-hold paste worked through the ends to create definition without restricting movement.

The disconnected undercut features side-swept long hair on top with sides and back shaved up to the hairline, creating a dramatic contrast.

On an oval face, the disconnected undercut adds sharp contrast between shaved sides and a long top.

On a heart face, the shaved sides remove width at the temples, and sweeping the long top across the forehead covers some of it, if you want the upper face to look less broad.

On a diamond face, the shaved sides make the cheekbones the widest visible point, while the long, swept top adds fullness above a narrower forehead.

Styling approach. Apply moveable pomade like wax or fibre to pull hair to one side for a loose look that improves with movement.

The slicked-back undercut shaves the sides while keeping the top longer and brushed directly back, distinguishing it from disconnected styles typically parted to the side.

On a square face, the backward direction and shaved sides leave the angular jaw in full view.

On a round face, brushing the top straight back with some lift adds height, which can make the face look longer.

On a triangle face, shaved sides take width away at the temples, which makes a broader jaw look comparatively wider; add lift at the crown if you want more fullness higher up.

Styling approach. Apply strong-hold pomade to damp hair, combing straight back from the hairline to create a sleek, controlled shape.

The side part undercut resembles the disconnected style but features shorter, more manageable top length, making it ideal for business environments.

On a rectangular face, a side-swept top kept low adds little height, so it does not make the face look longer, though the undercut sides add no width either.

On an oval face, the side part undercut is a neat, structured option that suits business settings.

On a square face, the side parting leaves the angular jaw visible; sweep the top more loosely if you want a softer finish.

Styling approach. Apply medium-hold pomade to damp hair, combing to create a defined part and smooth finish.

The blowout haircut features variable top length styled backward with short sides gradually tapered around the temple region, and it is often paired with a temple fade, which is why the two names are sometimes used together.

On a diamond face, the volumised top adds fullness above a narrower forehead while the tapered temples keep the cheekbones the widest visible point.

On a heart face, the blowout adds height and the backward styling shows the whole forehead, so it emphasises the upper face.

On a round face, the lifted, backward top adds height, which can make the face look longer.

Styling approach. Apply volumising mousse to damp hair, blow-drying backward while lifting at the roots for maximum height and movement.

The temple undercut keeps the shortest area around the temples, so the shape follows your own hairline there and varies from person to person.

On an oval face, the temple undercut adds sharp lines at the temples.

On a triangle face, clean temple lines take width away from the upper sides, which makes a broader jaw look comparatively wider, so choose it if you want to echo that outline.

On a rectangular face, the temple undercut removes hair at the temples, so it does not add width; keep the top low if you want to avoid adding length.

Styling approach. Apply light-hold product to damp hair, allowing the distinct temple design to remain visible while styling the top to your preference.

Fringe undercuts combine the structural contrast of an undercut with the face-framing properties of bangs, requiring careful selection based on hair type and texture.

On a square face, a fringe falling over the forehead adds movement above an angular jaw.

On a diamond face, a fringe adds fullness across a narrower forehead while the shaved sides leave the cheekbones visible.

On a heart face, a fringe covers some of the broader forehead, which makes the upper face look less dominant.

Styling approach. For a side-swept fringe, keep enough length at the front to sweep across the forehead; for curly textures, allow front bangs to fall naturally with minimal styling.

The curly undercut emphasises natural texture by fading the sides while preserving curls on top, creating vertical volume with clean perimeters.

On a round face, curls lifted on top with tight sides add height, which can make the face look longer.

On an oval face, the curly undercut shows off natural texture; how tall the curls sit depends on your curl pattern and shrinkage.

On a rectangular face, faded sides add no width and curls stacked high add length, so if you want the face to look less long, ask for a softer fade and a lower, wider curl shape.

Styling approach. Apply curl-enhancing cream to damp hair, allowing it to air-dry or diffusing to preserve the natural pattern.

This adaptable style combines minimal top length with clean undercut sides; it needs little daily styling, though the undercut needs regular trims.

On a square face, the short undercut leaves the angular jaw in full view, so it echoes that outline.

On a heart face, the undercut keeps the temples narrow and the short top keeps height low, so the forehead is not built up further.

On a triangle face, the undercut takes width away at the temples, which makes a broader jaw look comparatively wider; choose it if you want to echo that outline rather than offset it.

Styling approach. Apply minimal matte product for texture without weight, allowing the architectural shape to provide the primary impact.

The long undercut is often linked with Viking-inspired looks, combining medium to long top length with buzzed undercut sides that create dramatic contrast.

On a diamond face, long top hair falling to the sides covers some of the cheekbone width, while the buzzed sides keep the temples narrow.

On an oval face, the long undercut adds bold contrast between buzzed sides and a long top.

On a rectangular face, the buzzed sides add no width, so any width comes only from long top hair worn loose and falling sideways; worn up or slicked back, the long top adds height instead, so choose the styling for the effect you want.

Styling approach. Apply texturising spray to damp hair, allowing it to air-dry for natural movement or blow-drying for additional volume.

The pompadour undercut combines classic height and volume with contemporary tapered sides, creating architectural contrast with sophisticated appeal.

On a square face, the pompadour’s height adds length above the angular jaw.

On a round face, the pompadour’s height with tight sides can make the face look longer.

On a heart face, the pompadour adds height above the broader forehead; keep it lower if you do not want extra emphasis on the upper face.

Styling approach. Apply strong-hold pomade to damp hair, combing backward while creating height at the front.

The Short Butch represents ultimate simplicity with even length throughout, serving as the foundation for variations like Fade Butch and Shave Line Butch.

On an oval face, the short butch keeps an even length, so the outline is shown plainly.

On a square face, the even short length leaves the angular jaw in full view, so it echoes that outline.

On a diamond face, very short sides make the cheekbones the widest visible point.

Styling approach. Product-free styling with regular maintenance to preserve the precise, uniform length.

The long butch cut features layered top hair styled upward in controlled disorder with skin-faded sides; lifted, the top adds height.

On a round face, upward-styled layers with skin-faded sides add height, which can make the face look longer.

On a heart face, the faded sides keep the temples narrow; keep the top less lifted if you do not want to add height above the forehead.

On a rectangular face, skin-faded sides add no width and an upward-styled top adds height, so this cut makes the face look longer; if you want the opposite, ask for fuller sides and push the top forward rather than up.

Styling approach. Apply minimal texture paste to create definition without overwhelming the clean architectural lines.

The fade butch adds visual interest to the standard butch cut through subtle graduation on the sides and textured waves on top.

On a triangle face, faded sides take width away at the temples, which makes a broader jaw look comparatively wider; choose it if you want to echo that outline.

On an oval face, the fade butch adds a neat, graduated finish with textured waves on top.

On a diamond face, faded sides make the cheekbones the widest visible point while textured waves add interest on top.

Styling approach. Apply light-hold product to create subtle texture on top while preserving the clean fade on sides.

This is the short butch with a single line shaved into the side.

On a square face, the shaved line adds a sharp detail that echoes the angular jaw.

On a round face, the shaved line adds a straight, defined line to a curved outline.

On a rectangular face, a horizontal shaved line is a design detail on the side of the head; by itself it will not change how long or wide the face looks.

Styling approach. Regular maintenance preserves the precise line work. Style with minimal product to keep focus on the architectural details.

The classic Edgar combines a short Caesar cut with high skin fade, ideal for men with thick hair seeking structured yet edgy style.

On an oval face, the classic Edgar adds a crisp straight line across the forehead and sharp contrast at the sides.

On a heart face, the forward-styled fringe covers much of the broader forehead, which makes the upper face look less dominant.

On a square face, the straight fringe line and high fade repeat the angular jaw’s straight lines.

Styling approach. Apply minimal product to direct the front section forward with defined straight lines across the forehead.

While classic Edgars suit straight hair, the wavy Edgar keeps natural waves on top above higher-contrast undercut sides.

On a round face, the straight front line and tight sides add definition to a curved outline.

On a diamond face, waves on top add fullness above a narrower forehead and soften the overall look.

On a triangle face, wavy volume on top adds fullness higher up, while the high-contrast sides take width away at the temples; weigh both before choosing.

Styling approach. Apply curl-enhancing cream to damp hair, allowing natural waves to form while maintaining the straight fringe section.

The spiky Edgar adds edgy texture to the top section while maintaining the signature straight fringe, creating dimensional contrast.

On a rectangular face, the faded sides add no width and the spiky top adds some height, while the straight fringe covers some of the forehead and shortens the visible face length; keep the spikes low if you want the face to look less long.

On an oval face, the spiky Edgar adds texture and a sharp fringe line.

On a square face, spiky height above the angular jaw adds vertical contrast.

Styling approach. Apply clay or pomade to create texture throughout the top section while leaving the front smooth for the classic Edgar fringe line.

Pairing the Edgar with a mid fade creates sharper, more distinctive straight-line effects visible from the profile.

On a diamond face, the mid fade keeps the cheekbones the widest visible point, while the straight fringe adds a line across a narrower forehead.

On a heart face, the fade keeps the temples narrow and the forward fringe covers some of the forehead, if you want the upper face to look less broad.

On a triangle face, the fade takes width away at the temples, which makes a broader jaw look comparatively wider; choose it if you want to echo that outline.

Styling approach. Apply medium-hold product to direct the top section forward while preserving the clean fade lines on sides.

The short curtain is the most compact version, with a sharp centre parting and textured sides, often blended with an undercut.

On an oval face, the short curtain adds a ’90s-inspired centre parting that frames the forehead.

On a square face, the curtain fringe falling to each side adds softer lines near the temples, while the jaw stays visible.

On a heart face, curtains falling across each side of the forehead cover some of its width, which makes the upper face look less broad.

Styling approach. Keep ends sharp and straight for modern interpretation. Apply styling gel for slick finish or texture paste for casual effect.

The medium curtain keeps the fringe long enough to fall either side of a centre parting; on wavy or curly hair, it opens into loose curls on each side rather than straight panels.

On a diamond face, curtains falling near the cheekbones soften that line and add fullness at the forehead.

On a round face, a centre parting creates a vertical line, but curtains that sit wide at the cheeks add width, so keep the sides close to the face if you want it to look longer.

On a rectangular face, curtains that sit out at the sides add width and the fringe covers some of the forehead, both of which make the face look less long.

Styling approach. Apply hair oil or light gel to enhance natural texture, finishing with texturising spray for dimension without weight.

Centre-parted long curtain cuts sit easily with rock aesthetics from Glam Rock to Punk, Britpop, Indie and Metal.

On a triangle face, long curtains falling over the jaw corners soften them, while volume at the crown adds fullness higher up.

On an oval face, long curtains frame the face and create a dramatic silhouette.

On a heart face, long curtains that fall around the jaw can add visual width there (a cut cannot change the jaw itself) and cover some of the forehead, if you want the upper face to look less dominant.

Styling approach. Use nourishing treatments regularly. For straight hair, flat iron or curling wand can create the desired effect.

The short black curtain haircut recalls the heartthrob styles of the 1990s.

On a square face, short curtains falling at the temples add softer lines near an angular jaw.

On a diamond face, the curtains add fullness across a narrower forehead while leaving the cheekbones visible.

On a round face, the centre parting adds a vertical line, which can make the face look a little longer if the sides are kept close.

Styling approach. Keep back and sides shorter with top length reaching mid-ear. Apply wet-look gel for that distinctive ’90s aesthetic.

The messy curtain offers adventure-seeking men a rebellious interpretation that balances structure with deliberate disorder.

On a rectangular face, messy curtains that spread out at the sides add visible width, and the fringe falling across the forehead covers some of its height; the centre parting itself does not shorten the face, so the effect comes from where the volume and fringe sit.

On an oval face, the messy curtain adds loose texture and movement.

On a triangle face, messy volume at the crown and temples adds fullness higher up next to a broader jaw.

Styling approach. Precision of part matters less with this style. Keep length above ear level to avoid appearing disheveled rather than deliberately messy.

The wavy curtain is a medium-length curtain cut on wavy hair, so the waves fall loosely either side of the parting.

On a heart face, wavy curtains that fall to the jaw can add visual width there (a cut cannot change the jaw itself) and cover some of the forehead, if you want the upper face to look less dominant.

On a diamond face, waves falling near the cheekbones soften that line and add fullness at the forehead.

On a round face, waves that sit close to the face with some height at the crown can make it look longer, while waves that spread wide at the cheeks add width.

Styling approach. Maintain cleanliness with regular washing. Add texture and movement with sea salt spray for enhanced wave definition.

The straight curtain suits fine, straight hair, which falls cleanly either side of the centre parting.

On a square face, straight curtains falling to each side add softer lines at the temples while the jaw stays visible.

On an oval face, the strong centre parting divides the fringe neatly.

On a rectangular face, a centre parting is a vertical line, not a horizontal one, so it does not add width; any width comes from how far the straight curtains sit out at the sides, and a fringe covering more of the forehead shortens the visible face length.

Styling approach. Contemporary interpretations welcome diverse hair types beyond the traditional fine, straight texture. Apply minimal product for natural movement.

This style relies on natural curls, so a regular curl care routine helps keep the pattern defined.

On a square face, natural curls falling at the sides add rounded movement next to an angular jaw.

On a heart face, curls worn forward and to the sides cover some of the forehead, if you want the upper face to look less dominant.

On a diamond face, curls add fullness at the forehead and soften the cheekbone line.

Styling approach. Use nourishing treatments regularly to maintain curl health. Those creating artificial curls should focus on repair treatments.

This versatile style pairs well with a groomed beard and still looks good when messy.

On an oval face, short curls add texture and character without much change to the outline.

On a round face, short curls kept taller on top than at the sides add height, which can make the face look a little longer.

On a rectangular face, short curls that sit out at the sides add width, while curls stacked on top add height; ask for more fullness at the sides if you want the face to look less long.

Styling approach. Keep styling minimal and let the curls set their own shape. Apply light curl cream to enhance definition without weighing down the style.

This contemporary style combines a tapered fade at the sideburns with a faux mohawk built from ringlets.

On a triangle face, voluminous curls on top add fullness higher up, while the tapered sides keep the temples narrow; weigh both before choosing.

On a diamond face, the tapered sides keep the cheekbones the widest visible point while the curly top adds height and fullness above a narrower forehead.

On a heart face, the curly ridge adds height above the broader forehead; keep it lower if you do not want extra emphasis on the upper face.

Styling approach. Define curls with specialised products. Maintain contrast between faded sides and prominent top section for maximum impact.